PA Team
The PA team shares equal responsibility in ensuring that services run smoothly. The instructions on this page are to set out what is expected of the PA team and to give some basic tips to handle common issues within a service.
Your first steps are to turn everything on:
  • Sound Desk
  • Old Dynacord Amplifier
  • New Dyncaord Amplifiers
  • Musician's foldback amplifier (in amp cabinet at the front of church)
  • Hearing aid (induction loop) amplifier
  • Check two amplifiers are on for the Foyer and PA room in the rack in the back corner of the PA room
Check that the new Dynacord amplifiers are in the correct preset mode for the service. You can read which mode they are in using the LCD displays on the front of the amplifiers and you can switch between morning/evening presets using the rightmost switch on the panel used to switch those amplifiers on.

Set up microphones
The puplit requires one SM58 microphone, this should be leaning forward over the perspex surface on the pulpit to get the microphone as close to the speaker as possible
Musicians: More details about which microphones to use are available in the microphones tab, but you will need to set up a microphone per singer, one per instrument and then ensure that any guitars are plugged in. The Piano and Drums should already be plugged into the stage box, but it's worth checking in case something has been moved during the week.

Make sure the desk is in Sundays mode and the User button on the left handside is lit - it should be bright green. Pressing that button will toggle between the standard desk layout and the User layout that we use on Sundays.
In User mode, the channels to the right of the main fader should display the vocal/music groups and then the FX channels. Otherwise those channels will just display mixing channels 25-32.
It's always worth loading the default scene on the desk as channel 1 seems to reset the input gain to 20db when switching profiles. The easiest way to load the default scene is to press the "1" button to the right of the main fader. This ensures all correct defaults are loaded before you start sound checking.

Sound Check
Make sure you can hear something through every channel that you've set up. Use the headphones in the PA room and press the solo button one channel at a time to make sure something is coming through.
It's critical to check that the pulpit mic is working and set to the correct level. After that, set up the musicians so you can pick out any channel when you try to listen. No one input should be overly dominant in the mix, but it makes sense for the vocals to be slightly louder and clearer than the rest of the instruments.

Mixing during the service
Remember that we mix everything other than the computer through the subgroups that are to the right of the main fader when the mixer is in User mode. This means that any pulpit/reading/radio mic needs to have sub group A faded up to the U mark and all musicians and singers need to have sub groups C and D faded up to the U mark to come through the main outputs.
You should always have at least one set of faders up during the service; Vox A, Music C/D or Computer. Best practice is to fade up the next fader before fading the previous one down, so you would have short periods where 2 sets of faders would be up on the transition between service elements.

Pre-empt requirements
Try to pre-empt requirements where possible. For example, if there is an interview with more than one interviewee, please offer the handheld microphone to the service leader so they can stand away from the pulpit and the interviewee can stand at the pulpit. Likewise, the person doing the children's talk may require a microphone. If they do, the clip on mic will probably be best so they have their hands free.

End of service
Once any sound requirements at the end of the service have finished (musicians have stopped or any post-service music has played for at least 15 minutes), please pack away and turn everything off. You can normally pack microphones away while the musicians or music is playing at the end and the musician's foldback amplifier can also be turned off at this point.

Please lock all mic stands away under the platform after each service and lock the microphones away in the PA room drawers/cabinet. Finally, turn off all of the Dynacord amplifiers and the induction loop. After the evening service, please switch the preset button back to the Morning preset so it's ready for the next service.